jcb-js360-excavator

SELECTED DIMENSIONS IN FT-IN (MM)
  • A. Track link on ground: 13-2 (4021)
  • B. Undercarriage overall length: 16-3 (4954)
  • C. Track gauge: 8-6 (2600)
  • D. Width over tracks (24 in (600 mm) trackshoes): 10-6 (3200)
  • D. Width over tracks (28 in (700 mm) trackshoes): 10-10 (3300)
  • D. Width over tracks (32 in (800 mm) trackshoes): 11-2 (3400)
  • D. Width over tracks (36 in (900 mm) trackshoes): 11-6 (3500)
  • G. Counterweight clearance: 3-11 (1214)
  • H. Tail swing radius: 11-4 (3460)
  • I. Overall width of superstructure : 9-10 (2990)
  • J. Height over cab: 10-6 (3202)
  • K. Height over grab rail: 10-6 (3220)
  • L. Ground clearance: 1-8 (530)
  • M. Track height: 3-4 (1024)
  • N. Tail Length: 11-3 (3431)

Dipper lengths (in ft-in (mm)): 7 ft 3 in (2.21 m)

  • E. Transport length: 37-0 (11,280)
  • F. Transport height: 11-9 (3590)
JCB EXCAVATOR JS360 SPECIFICATIONS

Engine

  • Model: Isuzu AH – 6HK1X Tier 3
  • Type: Water cooled, 4-stroke, 6-cylinder in-line, common rail direct injection,
    turbocharged and intercooled diesel
  • Net power (SAE J1349 and 80/1269/EEC): 202kW (271hp) at 2000rpm
  • Gross power: 210kW (281hp) at 1900rpm
  • Piston displacement: 7.8 litres (475 cu.in.)
  • Bore/stroke: 115mm x 125mm (4.5in. x 4.9in.)
  • Air filtration: Dry element with secondary safety element and in-cab warning indicator
  • Starting system: 24 volt
  • Batteries: 2 x 12 volt
  • Alternator: 24 volt 50 amp
  • Max. operating weight: 38372kg (84,596lb)

Services capacities

  • Fuel tank: 670 liters
  • Engine coolant: 38.0 liters
  • Engine oil: 38.0 liters
  • Swing reduction gear: 14.5 liters
  • Track reduction gear (each side): 8.5 liters
  • Hydraulic system: 370 liters
  • Hydraulic tank: 183 liters

Hydraulic system
A variable flow load sensing system with flow on demand, variable power output and servo operated, multi-function open center control

Pumps

  • Main pumps: 2 variable displacement axial piston type
  • Maximum flow: 2 x 82 gpm (2 x 310 l/min)
  • Servo pump: Gear type
  • Maximum flow: 7.9 gpm (30 l/min)

Control valve
A combined four and five spool control valve with auxiliary service spool as standard. When required twin pump flow is combined to boom, dipper and bucket services for greater speed and efficiency

Relief valve settings

  • Boom/Arm/Bucket: 4,627 lbf/sq in (319 bar)
  • With power boost: 5,047 lbf/sq in (348 bar)
  • Swing circuit: 4,120 lbf/sq in (284 bar)
  • Travel circuit: 4,974 lbf/sq in (343 bar)
  • Pilot control: 652 lbf/sq in (45 bar)

Hydraulic Cylinders
Double acting type, with bolt-up end caps and hardened steel bearing bushes. End cushioning is fitted as standard on boom, dipper and bucket rams

Filtration
The hydraulic components are protected by the highest standard of filtration to ensure long hydraulic fluid and component life

  • In tank: 150 micron, suction strainer
  • Main return line: 10 micron, glass fiber element
  • Plexus Bypass Line: 1.5 micron, paper element
  • Pilot line: 10 micron, paper element
  • Hydraulic hammer return: 10 micron, reinforced microform element

Cooling
Worldwide cooling is provided via a single faced full return line air blast cooler with anti-block wavy cooling fins

PHOTO GALLERY
REQUEST A QUOTE